quadient IS-280 - Logging In; Out as the Supervisor

Logging In / Out as the
Supervisor
9.2
You need to be logged in as Supervisor to:
•
Configure your Mailing System.
•
Change your Default Settings.
•
Manage Accounts and Assign Access Rights.
•
Generate certain reports.
When you are logged in as the Supervisor, only the Supervisor Menu is available.
Printing postage is not possible while logged in as the Supervisor.
How to Log in as the Supervisor
To log in as the Supervisor when you are already logged in as a User:
1. The Login Screen appears.
The Login Screen appears.
2. Enter your Supervisor PIN Code and press [OK] .
The supervisor Main Menu appears.
You can log in as the Supervisor by directly typing the Supervisor
PIN Code, in place of a regular user PIN Code, If your Mailing
System is configured to require a PIN Code at start-up, you can
log in as the Supervisor at start-up by entering your Supervisor PIN
Code.
114
| Page 114 | | |
9
Configuring your Mailing System