Activating Access Control and
PIN Codes
5.2
If you want to prevent unauthorized use of your Mailing System,
and you do not want to use Accounts to track postage usage,
activate the Access Control Function.
This Mode requires all users to log in to the System by entering a
4 digit Security PIN Code at Start Up.
How to activate 'Access Control' and create a 'PIN Code'
1. Log in as the supervisor (See How to Log in as the Supervisor on page 114 ) then:
Press and type 5.1.4
Or
Select the path: Account Mode Selection No Accounts with Access control
The Account Mode Selection Screen appears.
2. Create a PIN code and press [OK] .
64
| Page 64 | | |
5
Managing Accounts and Assigning Rights
To Next Page
Loading...
