Q40 Tape Library Installation and Operations Manual
511026 Rev. 07-01-19 58
5.4.6 Save/Restore
The Configuration > Save/Restore page provides the following submenus:
• Save Configuration File
• Restore Configuration File
• Reset Default Settings
• Reset the List of Known Drives and Modules
• Reset Default Manufacturing Settings (only accessible with service PIN)
• Reset Internal IP Range
5.4.6.1 Save Configuration File
From the Save/Restore > Save Configuration File page you can save the library configuration to a USB
device.
1. I
nsert a USB device on the OCP.
2. Press Submit to save the configuration file on the USB device. A dialog will notify the user that the
s
aving process has started.
3. A dialog box will confirm that the configuration file was saved successfully.
To Next Page
Loading...
