Single channel video server BES X Installation Manual, Rev.9, Jun 2018
106
106 P/N: 400288005
10.1 - 288201089 wiring
The 288201089 single channel video server unit is the hardware needed to broadcast a video signal from a
single source to the BES X system. The video signal is broadcasted in 720x576 (Standard Definition) for a
PAL video signal and in 720x480 (Standard Definition) for a NTSC video signal.
The 288201089 unit has a Static IP address pre-assigned by QubicaAMF.
The default IP address of the 288201089 unit is:
IP Address: 192.168.216.201;
Subnet Mask: 255.255.248.0.
NOTE: the 288201089 unit shall be the only video server unit installed in the center.
10.1.1 - How to change the video standard from NTSC to PAL
with 288201089
The 288201089 video server is preconfigured to broadcast a NTSC video signal. If there is the needing to
change the video standard from NTSC to PAL follow this procedure:
Once the 288201089 video server has been correctly installed and is up and running, open a web
browser (i.e.: internet explorer) page on a ConquerorPRO computer and enter in the address bar
the 192.168.216.201 IP address.
In the menu on the left, click on “Log in”:
Enter the following credentials in order to log in:
o User Name: qamf
o Password: qamf
To Next Page
Loading...