BES X Installation Manual, Rev.9, Jun 2018 How to
P/N: 400288005 145
14.5 - How to configure the speaker and microphone for
the Virtual Waiter in Windows
The Virtual Waiter feature to function properly needs that the hardware device used for the playback of the
sound is set as the Default device and the desired audio input device is the only audio input device enabled
and has to be set as the Default audio input device. All of these configurations have to be performed in
“Sound” application, in the Control Panel of Windows.
Example:
Connect and install the wireless headset on the computer as specified by the manufacturer instructions.
Once the headset is correctly installed follow this procedure:
Open Sound by clicking the Start button, clicking Control Panel and then click Sound;
In the Playback tab select the Speakers of the installed headset (in this example we used the
Logitech Wireless Headset) and click on the “Set Default” button.
In the Recording tab select the Microphone of the webcam (in this example we used the Logitech
HD Webcam C270), right-click on it then select “Disable”.
To Next Page
Loading...