BES X Installation Manual, Rev.9, Jun 2018 How to
P/N: 400288005 141
14.2.1 - How to open a lane from an EasyKey bowler terminal.
To open a lane in emergency from an EasyKey bowler terminal, press the button and follow the
sign-in procedure, explained in the “BES X user interface Manual – EasyKey”.
14.2.2 - How to open a lane from a SuperTouch bowler terminal.
To open a lane in emergency from an SuperTouch bowler terminal, touch the screen and follow the sign-in
procedure, explained in the “BES X user interface Manual – SuperTouch”.
14.3 - How to upload programs or reinitialize the system
The program loading process requires a variable amount of time. The time is dependent on the changes
being made to the current lane software.
When sending the programs to the 4HD/5HD-CPU, the ConquerorPRO program displays the status of the
loading of the programs process divided into several steps. At the end of the process the ConquerorPRO
program displays the success or the failure of the program upload process.
The utility can be accessed from ConquerorPRO by selecting the icon : Setup / Technical Setup / Upload to
lanes
ERASE MEMORY: If this option it is selected the game will be erased and all the software into the internal
memory will be recharged, so if this option it is selected the uploading programs process will be longer.
REINITIALIZE: Clicking on this field will perform a Reinitialize procedure. This process will reload the whole
system on the selected lane pair. This procedure will take more than an hour to finish. DO NOT switch off
the BES X system during this process.
LANES SELECTED: Clicking on this field will open a window where it is possible to select the lanes
RESET: The selected lanes will be reset.
UPLOAD: Upload programs to the selected lanes.
To Next Page
Loading...