T. 0.01 53
MAY 21st 1820
610325104 KIT FOR MOUNTING
TWO BES X PEDESTALS AT 60°
(286002846)
[508]
20.00
2
1
3
CONSOLE PEDESTALS
SHOWN FOR REFERENCE
This kit is for the purpose of mounting two X pedestalsBES
with a common cable entry. The mounting plate (item 2)
provides cable passage to the two X pedestals; theBES
cover plate (item 1) is removable to provide access for
servicing of the X cables.BES
INSTALLATION INSTRUCTIONS:
1. Use mounting plate (item 2) to transfer and drill
mounting holes for two X pedestals to floor.BES
2. Loosely mount base of the X pedestals to floorBES
thru the mounting plate.
3. Pass cables for both X pedestals beneath bases ofBES
the X pedestals.BES
4. Install the cover (item 1) on the mounting plate (item 2)
using the screws provided (item 3).
5. Mount the rear base covers of the X pedestals toBES
the X pedestal bases.BES
6. Adjust the X bases with rear covers so that theBES
X base covers do not interfere with theBES
cover (item 1).
7. Secure the X base to the floor and mounting plate.BES
8. Continue with the installation of the X pedestals.BES
286002843
286002844
CVR plate two pedestals at 60°
MTG plate two pedestals 60°
01-019 PHPMS 10-32 X 0.38 ZN
1
1
6
PARTS LIST
ITEM
1
2
QTY P/N DESCRIPTION
3
To Next Page
Loading...