Scoring network BES X Installation Manual, Rev.9, Jun 2018
72
72 P/N: 400288005
5.2.3 - Centers with: up to 12 lanes, MMS, TCS, Q-COM and
single channel video server.
Three 8 ports network switches will be supplied by QubicaAMF for this configuration.
The connections for the main scoring network switch are:
1 port for the home-run cable;
1 port for the slave scoring network switch;
1 port for the MMS and Q-DAC switch.
The connections for the slave scoring network switch are:
1 port for the main scoring network switch;
1 port for the single channel video server;
6 ports for 4HD/5HD-HUB units.
The connections for the MMS and Q-DAC switch are:
1 port for the main scoring network switch;
7 ports for MMS and Q-DAC units.
The 4HD/5HD-HUB units have to be connected to the slave scoring network switch via standard patch
network cables. Refer to tables T.20.079 and T.20.096 for standard installations or to table T.20.082 if XLi
pinspotters with safety kit are present for the correct patch cables’ length.
The single channel video server, if present, have to be connected to the slave scoring network switch using
a Cat.5e solid network cable.
The slave scoring network switch have to be connected to the main scoring network switch using the
provided network cable.
The second network card of the ConquerorPRO server have to be connected to the main scoring network
switch using a Cat.5e solid network cable.
The MMS and the Q-DAC units have to be connected to the MMS and Q-DAC switch.
The MMS and Q-DAC switch have to be connected to the main scoring network switch using the provided
network cable.
This configuration is described in the table T.20.093.
To Next Page
Loading...