QubicaAMF BES X - LCOM Line

T. 0.4 008
MAY 2nd 1720
STANDARD
NETWORK CABLE
13 mm
1/2"
Category 5
Unshielded
CableUTP
Protection Cap
RJ45 Plug
Pin1
Pin8
- Skin off the cable jacket approximately 25mm (1").
- Untwist each pair and straighten the wires.
- Put the protection caps on the cable
- Place the wires in the right order.
For a Standard cable wire both ends as .Plug 1
- Cut all the wires at a perfect 90 degrees angle,
at 13mm (1/2") from the cable jacket.
- Insert the wires into the plug.
- Crimp the plug.
1 2 3 4 5 6 7 8
Orange / White
Orange
Blue
Blue / White
Green
Brown / White
Brown
Green / White
1 2 3 4 5 6 7 8
Orange / White
Orange
Blue
Blue / White
Green
Brown / White
Brown
Green / White
1
8
Plug 1
1
8
Plug 2