25
Confirm set value (last changed digit will stop pulsing)
Above activities repeat for next values. After setting new values of time press
ENTER key. Balance will return to submenu P3 Date/Time and hour displayed
on upper bargraph will change.
04 Date
With F key enter parameter 04 Date setting.. According to previous description
(03 Time) set current date. After date setting return to weighing mode with
changes saving in menu.
Fig. 12. Submenu Date / Time – date setting
05 Disp time
For setting 1 – YES on upper bargraph, time will be displayed, for setting 0-NO
time will not be displayed.
05 Disp date
For setting 1 – YES on upper bargraph, date will be displayed, for setting 0 –
NO date will not be displayed.
To Next Page
Loading...
Need help?
General
