ppbRAE 3000 User’s Guide
29
Basic User Level/Hygiene Mode (Default
Settings)
The instrument is programmed to operate in Basic User Level/Hygiene Mode
as its default. This gives you the most commonly needed features while
requiring the fewest parameter adjustments.
Pressing [N/-] steps you from one screen to the next, and eventually return to
the main display. If you do not press a key within 60 seconds after entering a
display, the instrument reverts to its main display.
Note: While viewing any of these screens, you can shut off your instrument by
pressing [MODE].
To Next Page
Loading...
