ppbRAE 3000 User’s Guide
88
Basic User Level & Search Mode
With the instrument in Operation Mode: Search Mode, enter User
Mode and select Basic User Level (refer to the section called User
Mode for instructions).
When the instrument is in Search Mode, it only samples when you
activate sampling. When you see the display that says, “Ready…Start
sampling?” press [Y/+] to start. The pump turns on and the instrument
begins collecting data. To stop sampling, press [N/-] while the main
display is showing. You will see a new screen that says, “Stop
sampling?” Press [Y/+] to stop sampling. Press [N/-] if you want
sampling to continue.
To Next Page
Loading...
Need help?
General
