ppbRAE 3000 User’s Guide
65
Alarm Type
There are two selectable alarm types:
Latched When the alarm is triggered, you can
manually stop the alarm.
The latched setting only controls alarms for
High Alarm, Low Alarm, STEL Alarm, and
TWA alarm.
Note: To clear an alarm when the instrument
is set to “Latched,” press [Y/+] when the
main (Reading) display is shown.
Automatic Reset When the alarm condition is no longer
present, the alarm stops and resets itself.
1. Press [N/-] to step from one alarm type to the other.
2. Press [Y/+] to select an alarm type.
When you have completed your selections, press [MODE].
You will see two choices: Save and Undo. You have the
opportunity to register the new settings or to change your mind
and revert to your previous settings.
Press [Y/+] to save the changes.
Press [N/-] to undo the changes and revert to the previous
settings.
To Next Page
Loading...
