Rae ppbRAE 3000 User Manual

ppbRAE 3000 User’s Guide
79
Real Time Protocol
Real Time Protocol is the setting for data transmission.
The choices are:
P2M (cable) Point to multipoint. Data is transferred from the
instrument to multiple locations using a wired
connection. Default data rate: 19200 bps.
P2P (cable) Point to point. Data is transferred only between
the instrument and one other location, such as a
computer. Default data rate: 9600 bps.
P2M (wireless) Point to multipoint, wireless. Data is transferred
wirelessly and can be received by multiple
receivers.
1. Press [N/-] to step from one option to the next.
2. Press [Y/+] to make your selection (the dark circle in the “radio
button” indicates “on”).
3. When you have completed your selection, press [MODE].
 Press [Y/+] to save the new real-time communications protocol.
 Press [N/-] to undo the change and move to the next sub-menu.
Power On Zero
When Power On Zero is on, the instrument performs a zero
calibration when it is turned on.
1. Press [N/-] to step from one option to the next.
2. Press [Y/+] to make your selection (the dark circle in the “radio
button” indicates your selection).
3. When you have completed your selection, press [MODE].
 Press [Y/+] to save the change.
 Press [N/-] to discard the change and move to the next sub-
menu.

Rae ppbRAE 3000 Specifications

General

Brand	Rae
Model	ppbRAE 3000
Category	Measuring Instruments
Language	English