ppbRAE 3000 User’s Guide
66
Buzzer & Light
The buzzer and light alarms can be programmed to be on or off
individually or in combination. Your choices are:
Both on
Light only
Buzzer only
Both off
1. Press [N/-] to step from one option to the next.
2. Press [Y/+] to make your selection (the dark circle in the “radio
button” indicates your selection).
3. When you have completed your selections, press [MODE].
You will see two choices: Save and Undo. You have the
opportunity to register the new settings or to change your mind
and revert to your previous settings.
Press [Y/+] to save the changes.
Press [N/-] to undo the changes and revert to the previous
settings.
Datalog
The instrument calculates and stores the concentration and ID of each
sample taken. In the datalog sub-menu, a user can perform the tasks
and functions shown below.
To Next Page
Loading...
