ppbRAE 3000 User’s Guide
95
Transferring Data To & From A
Computer
Once you have connected your instrument cradle to the PC, you can
can transfer data, including a download of the datalog to the computer
and updates of firmware to the instrument (should this ever be
necessary).
Downloading The Datalog To A PC
1. Connect the data cable to the PC and the cradle.
2. Place the instrument into its cradle. The charging LED should
be illuminated.
3. Start ProRAE Studio on your PC.
4. From ProRAE Studio, select “Operation” and select Setup
Connection.
5. Select the COM port to establish a communication link
between the PC and the instrument.
6. To receive the datalog in the PC, select “Downlog Datalog.”
7. When you see “Unit Information,” click OK.
During the data transfer, the display shows a progress bar.
When the transfer is done, you will see a screen with the datalog
information. You can now export this datalog for other use or
printing.
To Next Page
Loading...
Need help?
General
