To Next Page

To Previous Page

ppbRAE 3000 User’s Guide

number by 2. Use the [Y/+] or [N/-] key to increase or decrease the

stall value to equal that number.

Press the [MODE] key to exit this display.

Exiting Diagnostic Mode

You can exit Diagnostic Mode and go directly to Programming Mode

or Monitor Mode as outlined above, or you can exit Diagnostic Mode

completely.

To exit Diagnostic Mode so that it cannot be re-entered without a

restart:

Shut down the instrument. When it is off, restart it by holding the

[MODE] key. Diagnostic Mode cannot be entered until the instrument

is restarted as outlined in “Entering Diagnostic Mode.”

Questions and Answers:

Need help?

Do you have a question about the Rae ppbRAE 3000 and is the answer not in the manual?

Rae ppbRAE 3000 Specifications

General