ppbRAE 3000 User’s Guide
28
Operating Modes
Your instrument operates in different modes, depending on the model
and its factory default settings. In some cases, you can change modes
using a password and using the instrument’s navigation. In other
cases, you must use ProRAE Studio software.
The default setting for your instrument is:
User Level: Basic
Operation Mode: Hygiene
This is outlined in detail on page 83.
The other options, covered later in this guide, are:
User Level: Advanced (page 86)
Operation Mode: Hygiene
User Level: Advanced (page 90)
Operation Mode: Search
Using ProRAE Studio allows access to other options. In addition,
Diagnostic Mode (page 92) is available for service technicians.
To Next Page
Loading...
