R&S EB200 - Page 122

EB200 Manual OUTPut subsystem
4052.2000.02 4.48 E-7
. :BYTAux
. . [:STATe] <numeric_value>
Sets the 8 AUX bits by a single byte command
Parameters:
<numeric_value> value of the AUX bytes (0 to 255, #H00 to #HFF or #B0
to #B11111111)
*RST state:
0
Example:
OUTPut : BYTAux 7
. :BYTAux
. . [:STATe]?
Query of the 8 AUX bits by a single byte command
Parameters:
none
Result:
Depending on the settings by the FORMat : SREGister command , the contents of the register is
transferred in decimal, binary or hexadecimal form in the ASCII code.
Example:
OUTPut : BYTAux?
→ 7
:SQUelch
. . [:STATe] <Boolean>
Switch on/off of squelch
Parameters:
ON squelch on
OFF squelch off
*RST state:
OFF
Example:
OUTPut:SQUelch ON