R&S EB200 - Page 125

EB200 Manual OUTPut subsystem
4052.2000.02 4.51 E-7
. . . . . [:INCRement]? [MINimum|MAXimum]
Query of stepwidth
Parameters:
none query of currently set stepwidth
MINimum|MAXimum query of smallest|largest stepwidth
Result:
Stepwidth of squelch threshold in dB
µV
Example:
OUTP:SQU:THR:STEP? -> 10
:TONE
. . [:STATe] <Boolean>
Switch on/off of level tone function. With level tone function switched on a tone is output depending on
the level magnitude.
Parameters:
ON level tone on
OFF level tone off
*RST state:
OFF
Example:
OUTPut:TONE ON
. . [:STATe]?
Query of the TONE mode
Parameters:
none
Result:
1 level tone on
0 level tone off
Example:
OUTPut:TONE? -> 1