R&S EB200 - Page 138

EB200 Manual SENSe subsystem FREQuency
4052.2000.02 4.64 E-7
. :FREQuency
. . :AFC <Boolean>
Switch on/off the AFC function.
Parameters:
ON AFC function on
OFF AFC function off
*RST state:
OFF
Example:
SENSe:FREQuency:AFC ON
. . :AFC?
Query of AFC function
Parameters:
none
Result:
AFC function on 1
AFC function off 0
Example:
SENSe:FREQuency:AFC? -> 1
. . [:CW|FIXed] <numeric_value>|UP|DOWN|MINimum|MAXimum
Setting of receiver frequency
Parameters:
<numeric_value> frequency value
UP|DOWN increase|decrease of receiver frequency by the value set in the
command SENS:FREQuency[:CW|FIX]:STEP[:INCRement]
MINimum|MAXimum setting the lowest|highest receiver frequency
*RST state:
98.5 MHz
Example:
FREQuency 98.5 MHz