R&S EB200 - Page 141

EB200 Manual SENSe subsystem FREQuency
4052.2000.02 4.67 E-7
. . . :RESolution:AUTO?
Query of BW ZOOM mode.
Parameter:
none
Result:
BW ZOOM mode on 1
BW ZOOM mode off 0
Example:
FREQuency:DSCan:RESolution:AUTO -> 1
. . . :SPAN <numeric_value>|MINimum|MAXimum
Sets the display range of Digiscan
Corrects STARt and STOP frequency
Parameters:
<numeric_value> frequency value
MINimum | MAXimum setting min/max display range
*RST state:
25 MHz
Example:
FREQuency : DSCan : SPAN 10 MHz
. . . :SPAN? [MINimum|MAXimum]
Query of the display range of Digiscan
Parameters:
none query of the current display range
MINimum | MAXimum query of min/max display range
Result:
frequency value in Hz
Example:
FREQuency : DSCan : SPAN? -> 10000000