EB200 Manual SENSe subsystem FREQuency
4052.2000.02 4.66 E-7
. . . :MARKer <numeric_value>|MINimum|MAXimum
Sets the marker frequency of Digiscan
Parameters:
<numeric_value> frequency value
MINimum | MAXimum setting min/max marker frequency
*RST state
98.5 MHz
Example:
FREQuency : DSCan : MARKer 120 MHz
. . . :MARKer? [MINimum|MAXimum]
Query of the marker frequency of Digiscan
Parameters:
none query of the current marker frequency
MINimum | MAXimum query of min/max marker frequency
Result:
Frequency value in Hz
Example:
FREQuency : DSCan : MARKer? -> 120000000
. . . :RESolution:AUTO<Boolean>
Setting BW ZOOM on and off. When the BW ZOOM is set on in DSCAN, the start and stop frequency
as well as span and center frequency are coupled (see 3.18.3 D-SCAN (OPTION)):
Parameters:
ON BW ZOOM mode on
OFF BW ZOOM mode off
*RST state:
OFF
Example:
FREQuency:DSCan:RESolution:AUTO ON
To Next Page
Loading...
