R&S EB200 - Page 178

EB200 Manual SYSTem subsystem
4052.2000.02 4.104 E-7
. :BEEPer:VOLume <numeric_value>|MINimum|MAXimum
Sets the volume of the beeper.
Parameters:
<numeric_value> volume of beeper from 0 to 1
0 = beeper off
0.01 to 0.5 = beeper soft
0.51 to 1 = beeper loud
MINimum|MAXimum beeper off|beeper loud
Remark:
The volume of the beeper can be set in 3 discrete steps only. The parameter is therefore rounded to the
next discrete value.
*RST state:
1
Example:
SYSTem:BEEPer:VOLume 0.3
. :BEEPer:VOLume? [MINimum|MAXimum]
Query of volume of beeper.
Parameters:
none
MINimum|MAXimum min. | max. volume
Example:
SYSTem:BEEPer:VOLume? -> 0.5