R&S EB200 - Page 179

EB200 Manual SYSTem subsystem
4052.2000.02 4.105 E-7
. :COMMunicate:SERial:BYTeesc <Boolean>
Switch-on and off of the byte-escaping mechanism for serial transmission. See also Appendix A.
Parameter
ON Activation of byte escaping
OFF Deactivation of byte escaping
Example:
SYSTem:COMMunicate:SERial:BYTeesc ON
. :COMMunicate:SERial:BYTeesc?
Query whether the byte-escaping mechanism for serial transmission is switched on or off.
Parameter:
None
Example:
SYSTem:COMMunicate:SERial:BYTeesc? -> 1
. :ERRor?
Reads the next input from Error Queue
Parameters:
none
Result:
Next entry of Error Queue. If the Error Queue is empty, 0, "No Error" is output
Example:
SYSTem:ERRor? -> 0, "No Error"