R&S EB200 - Page 97

EB200 Manual CALCulate subsystem
4052.2000.02 4.23 E-7
. . :MARKer:MAXimum[:PEAK]
The frequency marker jumps to the absolute level maximum in the DSCan spectrum.
Parameters:
none
Example:
CALCulate:DSCan:MARKer:MAXimum
. . :MARKer:MAXimum:NEXT
The frequency marker jumps to the next relative level maximum right of the marker within the DSCan
spectrum when the squelch is off. When it is on the frequency marker is set to the next level maximum
to the right that is above the squelch line. If there is no further level maximum right of the current level
maximum, the frequency marker jumps to the first level maximum to the left within the DSCan
spectrum.
Parameters:
none
Example:
CALCulate:IFPan:MARKer:RIGHt