Rauch AERO GT 60.1 - Electric Fuses; Electrics, Electronic System

Adjusting the holding tension on the boom
central section
ü
The boom is folded in.
u
T
urn the nut [4] on the 2nd hydraulic
cylinder.
Fig. 65: Boom central section
Observe:
• Increase tension: Screw out threaded rod.
• Reduce tension: Screw in threaded rod.
Adjusting the holding tension on the boom
end section
ü
The boom is folded in.
u
T
urn the nut [5] on the 3rd hydraulic
cylinder.
Fig. 66: Boom end section
10.9 Electrics, electronic system
n
Electric fuses
The power supply of the machine is fuse-protected via the ISOBUS cable of the tractor.
The
ISOBUS cable features a 50 ampere and a 30 ampere fuse for overload protection. The fuses
can be found in the electrical cabinet on the left side of the machine (viewed in the direction of travel).
10. Maintenance and service
106
5903494 AERO GT 60.1