Rauch AERO GT 60.1 - Camera for Rear View Monitoring

6.13 Camera for rear view monitoring
The rear view camera offers free view on the area behind the machine.
Check the correct setting of the camera at the ISOBUS terminal.
The lower third of the rear view camera has to show the wheels.
If
this is not the case, adjust the monitored section. This requires the support by a second person
observing the current view of the camera at the ISOBUS terminal in the tractor cabin.
Fig. 33: Field of view of the rear view camera
A Installation
height of the rear view camera:
Approx. 1.7 m
B Width of the viewing field: Approx. 6 m
C Depth of the viewing field: Approx. 7.5 m
D Viewing angle: 120°
1 Rear view camera
6. Commissioning
AERO GT 60.1 5903494
61