Button Spreading type
Activating the section from the center to the right
u
Press the function key several times until the desired working width is displayed.
8.7 Folding in the boom
DANGER!
Risk of death while the boom packages are folded in and out
The
boom packages can injure people while they are folded in and out. Keep in mind especially
that the boom packages also require space behind the machine.
u
Only operate boom if there is enough free space around the spreader.
u
Only fold the booms in or out when the attached spreader is at a standstill.
u
Ensure that nobody is present in the hazard zone.
The machine control unit can no longer determine the position of the boom and the height of the
pendulum frame once you have left the folding menu.
•
Before locking the boom, make sure to move it to the highest position.
Always keep an eye on the boom while folding it.
u
Press the Lift boom function key until the time has elapsed.
The boom is in the highest position.
u
Press the Lock function key for at least 3 seconds.
The Fold in end sections symbol appears on the menu screen.
u
Press
the Fold in end sections function key until the time has elapsed and the boom end
sections are fully folded in on both sides.
The pendulum frame is locked.
u
Press the Fold in main sections function key until the boom start sections and boom central
sections are fully folded in on both sides.
The pendulum frame is locked.
8. Spreading operation
AERO GT 60.1 5903494
79
To Next Page
Loading...
