u
Press Start/Stop.
T
urn the metering rollers.
WARNING!
Risk of injury due to rotating machine parts
Rotating
metering rollers may catch and pull in body parts or objects. Contact with rotating
machine components may cause bruises, abrasions and crushing injuries.
u
Always stay outside the area of rotating metering rollers while the machine is running.
u
Ensure that nobody is present in the hazard zone of the machine.
Fertilizer flow runs into the collection tray.
You can interrupt the emptying procedure at any time, e.g., to empty the collection tray.
•
Press Start/Stop.
u
After completely emptying of the spreading material hopper
, clean the machine.
w
See 10.2 Cleaning the machine
u
Reassemble the metering units.
Even though the spreader tanks have been emptied, they may still contain some fertilizer.
•
We recommend to completely empty the machine at the end of the season or after spreading.
8.9 Parking and unhitching the machine
WARNING!
Risk of tilting
The
machine is a single-axle vehicle. One-sided loading in the rear may lead to tilting of the
machine.
This may cause personal injury and property damage.
u
Park the machine on even and solid ground.
u
In case of uneven loading of the machine in the rear, never decouple it from the tractor.
• Only park the machine when it is empty.
u
Park the vehicle train on even and solid ground.
u
T
urn the tractor engine off and remove the ignition key.
8. Spreading operation
AERO GT 60.1 5903494
83
To Next Page
Loading...
