6 Commissioning
6.1 Accepting the machine
When accepting the machine, please check the completeness of the delivery.
The standard equipment includes:
•
1 boom-type mineral fertilizer spreader AERO GT 60.1
• 1 operator’s manual AERO GT 60.1
• Protective grid in hopper
• Empty indicator sensor in hopper
• 2 wheel chocks
• 1 wide-angle universal drive shaft (including operator’s manual)
• 1 electronic machine control unit with AERO ISOBUS operator’s manual
Please also check any additionally ordered optional equipment.
Check for any transport damage or missing parts. Have any shipping damage confirmed by the
forwarding agent.
In case of doubt, please contact your dealer.
6.2 Type approval
Please observe the applicable road traffic regulations of the respective country or the location of use of
the machine. If required, the importing body registers the machine at the respective registration office
for traveling on public roads.
• For additional identification (warning sign, lighting) please contact your dealer or importer.
6.3 Tractor requirements
To ensure a safe and correct use of the machine, the tractor must meet the necessary mechanical,
hydraulic, and electrical requirements.
• Tractor engine power: At least 180 HP
• Permissible static load at the pin or ball coupling: 2000 kg
• 1 single-acting control unit for the hydraulic block/axle
• 1 double-acting control unit for the hopper cover
• 1 free return
• Connections for the pneumatic brake system DIN ISO 1728 (control line and supply line)
• Universal drive shaft connection:
○ 1 3/8 inches, 6-part, 750 - 1000 rpm or
○ 1 3/4 inches, 20-part, 750 - 1000 rpm
• Oil supply: At least 60 l/min at p = 180 bar
• ISOBUS connection for job computer, as per ISO 11783
• 7-pin socket according to ISO 1727 for the lighting system
6. Commissioning
AERO GT 60.1 5903494
45
To Next Page
Loading...
