Rauch AERO GT 60.1 - Dismounting the Universal Drive Shaft

u
Pull
the universal drive shaft cover
backwards.
u
Press the sliding pin [1].
u
Slide the universal drive shaft on the
transmission spigot until the sliding pin
engages in the annular groove.
u
Release the sliding pin.
Fig. 22: Pushing the universal drive shaft onto the
transmission spigot
u
Push
the universal drive shaft cover over
the universal drive shaft.
u
Place the universal drive shaft cover onto
the transmission neck.
u
Tighten the clamp.
Fig. 23: Securing the universal drive shaft cover
The machine is equipped with a wide-angle universal drive shaft. When mounting to the tractor,
please
observe that the pivot point of ball coupling/pin coupling comes to rest in a vertical axis to
the pivot point of the wide-angle universal drive.
6.6.1 Dismounting the universal drive shaft
n
Instructions for dismounting
• Dismount the universal drive shaft in reverse order of mounting.
•
Always place the dismounted universal drive shaft into the safety chain on the towing bar.
6. Commissioning
AERO GT 60.1 5903494
49