Rauch AERO GT 60.1 - Page 48

u
Check the mounting position.
The drive shaft end that is marked with a tractor symbol must point to the tractor
.
u
Remove the spigot protection and grease
the transmission spigot [1].
u
Place the clamp [2] onto the transmission
neck.
Fig. 20: Putting on the clamp
Since the universal drive shaft consists of telescopic elements and is heavy, we recommend
hanging the universal drive shaft onto the machine before mounting.
•
Keep the universal drive shaft horizontal.
u
Place
the universal drive shaft [3] into the
safety chain [4] on the towing bar [1].
u
Hang a chain link [4] into the hook [2].
Fig. 21: Hanging the universal drive shaft onto the
towing bar
6. Commissioning
48
5903494 AERO GT 60.1