DANGER!
Danger to life due to carelessness or incorrect operation
There
is a crushing hazard that may result in fatal injury for persons standing between the tractor
and the machine when the tractor approaches or the hydraulic system is actuated.
The tractor may brake too late or not at all because of carelessness or incorrect operation.
u
Ensure that nobody is present in the hazard zone between the tractor and the machine.
DANGER!
Risk of tilting and rolling
During
filling, the unsecured machine may tilt or roll and cause severe personal injury and property
damage.
u
Hitch the machine only when the hopper is empty and the boom is folded in and secured.
u
Secure the machine against moving using the parking brake and by placing wheel chocks
under both wheels.
WARNING!
Risk of injury and property damage due to excessive static load
Exceeding
the maximum admissible static load of the drawbar compromises the steering and
braking function of the machine and the tractor.
Persons may be injured. This may lead to severe damage at the machine, the tractor or to the
environment.
u
Observe the admissible static load of the tractor.
u
Observe the admissible static load of the trailer equipment.
Check the following specific preconditions:
•
Are both the tractor and the machine safe to operate?
• Does the tractor comply with the mechanical, hydraulic, and electrical requirements?
• Does the tractor comply with the requirements defined by the technical data of the towed machine
(towed load, static load, etc.)?
• Is the machine securely positioned on level and solid ground?
• Is the machine properly secured against rolling?
• Is the height of the drawbar/ball coupling on the tractor adjusted correctly?
○ See 6.4 Checking the height of the pin or ball coupling
• Is the ISOBUS terminal installed in the tractor and functional?
• Is the combination of the connection equipment (towing eye - pin coupling or coupling bracket -
ball coupling) admissible?
6.7.2 Mounting
n
Ball coupling
Variant A
6. Commissioning
AERO GT 60.1 5903494
51
To Next Page
Loading...
