Rauch AERO GT 60.1 - Axle Suspension; Brake Pad; Checking the Brake Pad; Checking the Condition of the Axle Suspension

u
Pull the operation pin [1] with a finger
.
The tilt valve is opened.
u
Fully drain the condensation water.
u
Release the operation pin [1].
The air tank is drained.
Fig. 85: Draining the air tank
10.11.4 Checking the brake pad
n
Brake pad
u
Check the brake pad for wear
.
u
If necessary, renew the brake pads.
10.11.5 Checking the condition of the axle suspension
n
Axle suspension
u
Check the axle suspension in dry condition.
u
Check the suspension cylinders [2],
diaphragm accumulators [1 ], and hydraulic
lines [4 ] for damage.
u
Visually check the block and the pressure
compensator [3] for damage and leakage.
Fig. 86: Checking the axle suspension
10. Maintenance and service
AERO GT 60.1 5903494
123