u
Check the bearing clearance of the wheel hub.
10.12.4 Changing wheels
n
Retightening the wheel nut
The condition of the wheels and tires is crucial for the operational safety of the machine.
WARNING!
Risk of accident due to improperly carried out change of wheels
Improper change of wheels at the machine may lead to severe accidents and personal injury
.
u
Change wheels only if the machine is empty and coupled to the tractor.
u
For wheel change, the machine has to be parked on even and solid ground.
Requirements:
•
Use a jack with a minimum load rating of 5 tons.
• Use a torque wrench to tighten the wheel nuts.
Lifting jack positioning:
• The correct lifting jack application points
are marked with an illustration.
• Position the lifting jack in such a way that
the support surface cannot slip (e.g., using
a fitting piece of wood or rubber block).
10. Maintenance and service
126
5903494 AERO GT 60.1
To Next Page
Loading...
