Rauch AERO GT 60.1 - Electric Lines; Electronic Control Unit; Lighting System

Fig. 67: Fuses at the ISOBUS cable
[1] 30 A fuse [2] 50 A fuse
n
Electric lines
u
V
isually inspect all electric lines for wear.
w
Check particularly for outside damage or breaks.
n
Lighting system
u
Check the lighting system daily for proper condition.
Replace any parts that are damaged immediately.
Clean any parts that are dirty immediately
.
n
Electronic control unit
WARNING!
Risk of injury
The
electronic control unit is checked in real time. This means, the selected function is directly
executed by the machine components.
u
Ensure that nobody is present in the hazard zone.
10. Maintenance and service
AERO GT 60.1 5903494
107