u
Read
off the filling level on the filling level
indication [1] of the oil reservoir [2] .
The oil level is correct if it is between the
green and red marking of the filling level
indicator.
Fig. 76: Location of Vario drive oil reservoir
The oil reservoir is equipped with a filling level sensor [3]. You can also read of the filling level in
the machine control unit.
n
Oil level in the transmission of the Vario drive
u
Open
the checking screw [1] on the
transmission.
The oil level is OK if oil runs out.
Fig. 77: Checking the oil level of the Vario drive
transmission
u
If the oil level is not OK, top up transmission oil.
u
Find out what type of oil currently being used and top up the same type of transmission oil.
The oil level is OK if oil runs out of the checking screw
.
10.10.6 Oil change and oil filter replacement
n
Vario drive
10. Maintenance and service
116
5903494 AERO GT 60.1
To Next Page
Loading...
