9 Faults and possible causes
WARNING!
Risk of injury due to incorrect troubleshooting
Delayed
or incorrect repairs by unqualified personnel may result in severe personal injury as well
as in damages to the machine and the environment.
u
Any faults occurring must be repaired immediately.
u
Repairs may only be carried out by qualified personnel.
Troubleshooting requirements
•
Switch off the tractor engine and lock it to prevent unauthorized starting.
Please take particular note of the warnings in chapter 3 Safety
and 10 Maintenance and service.
Fault Possible cause Measure
The displayed speed for the
metering shaft on the operating
screen is "0".
The encoder on the front LEFT
or RIGHT metering drive is
defective.
u
Replace the encoder
.
The hydraulic line to the drive
motor is defective.
u
Replace the hydraulic line.
Broken cable on the wiring
harness to the encoder
.
u
V
isit an authorized
workshop.
9. Faults and possible causes
AERO GT 60.1 5903494
87
To Next Page
Loading...
