Rauch AERO GT 60.1 - Checking the Hydraulic System of the Vario Drive; Oil Level

[6] Hydraulic cylinder for slope
Fig. 75: Hydraulic cylinder, slope
10.10.5 Checking the hydraulic system of the Vario drive
The Vario drive is responsible for keeping the blower speed constant. The axial piston pump is driven
by
the tractor via the universal drive shaft. The oil reservoir of the on-board hydraulic system is filled
with approx. 40 liters of hydraulic oil.
The Vario drive consists of the following components, which must be maintained:
• Universal drive shaft
• Transmission
• Axial piston pump
• Axial piston motor
• Oil reservoir
• Oil filter
• Oil cooler with temperature sensor
n
Oil level
10. Maintenance and service
AERO GT 60.1 5903494
115