u
Move the tractor to the machine.
u
Switch of
f the tractor engine. Remove the ignition key.
u
Connect the hydraulic hoses of the hopper cover to the hydraulic control unit of the tractor.
See Fig. 26
6.8 Braking
The machine is equipped with a pneumatic braking system.
In
connection with the braking system, also observe the applicable national regulations of the country,
in which the machine is used.
As a standard, the machine is equipped with an automatic parking brake.
Fig. 28: Pneumatic brake
[1] Parking brake [2] Operating brake
WARNING!
Risk of injury due to the unsecured machine
Until the machine is fully coupled, it may still roll and cause personal injury
.
When coupling the machine, always observe the following sequence for the pneumatic lines:
u
Ensure that nobody is present in the hazard zone.
u
First, couple the yellow coupling head (brake line).
u
Afterwards, couple the red coupling head (supply).
For commissioning, please observe the following instructions:
6. Commissioning
AERO GT 60.1 5903494
55
To Next Page
Loading...
