5 Transport without tractor
5.1 General safety instructions
NOTICE!
Property damages caused by incorrect transport
The
eyelets in the hopper are not suitable for lifting the overall machine. They are only intended for
transport of the hopper during production and assembly.
Non-compliance leads to damage at the machine.
u
Make sure to observe the manufacturer's transport instructions.
Read the following instructions before transporting the machine:
•
Without tractor, the machine may only be transported with an empty hopper.
• Only suitable, instructed and expressively authorized persons may execute the work.
• Suitable means of transportation and lifting equipment (e.g., crane, forklift truck, lifting tackle ...)
are to be used.
• Establish the transportation route in good time and remove possible obstacles.
• Check that all safety and transportation devices are fully operational.
• Secure all danger areas appropriately, even if they only exist briefly.
• The person responsible for transportation ensures that the machine is transported appropriately.
• Unauthorized persons are to be kept away from the transport route. Cordon off the affected areas!
• Transport the machine cautiously and handle it with care.
• Ensure that allowances are made for the center of gravity. If necessary, adjust the cables to
ensure that the machine is correctly aligned on the means of transport.
• Transport the machine to the set-up location as close to the ground as possible.
5.2 Loading and unloading, parking
u
Determine the weight of the machine.
w
Check the details on the name plate.
w
T
ake the weight of mounted optional equipment into account.
u
Carefully lift the machine with suitable lifting equipment.
u
Carefully place the machine on the loading platform of the transportation vehicle or on solid
ground.
5. Transport without tractor
44
5903494 AERO GT 60.1
To Next Page
Loading...
