Rauch AERO GT 60.1 - Page 85

u
Apply wheel chocks at both wheels.
Fig. 55: Positioning the wheel chock
Extending the hydraulic support stand
u
Hold the support stand on the handle.
Fig. 56: Extending the support stand
u
Unlock
the support stand by pushing together the locking bolts [2] and fold it down until the
locking bolts have engaged in the bottom position.
u
Insert the operating lever [4] into the bracket of the pump.
u
Securely close the valve [1] at the top.
u
Extend the support stand through pump movements until the machine has released the coupling
point of the tractor.
u
Insert the operating lever [4] into the designated bracket.
8. Spreading operation
AERO GT 60.1 5903494
85