Rauch AERO GT 60.1 - Page 91

Fault Possible cause Measure
The support stand cannot be
extended far enough.
Support stand is not fully
extended.
u
Check
the oil volume in the
oil reservoir and top it up, if
necessary.
The brake on the machine does
not release while the tractor is
running.
Air losses due to leakages in the
brake system.
u
Visit an authorized
workshop.
The lighting system does not
work.
Power supply, plug connectors,
and/or wiring harness defective
u
Visit an authorized
workshop.
9. Faults and possible causes
AERO GT 60.1 5903494
91