Rauch AXIS EMC ISOBUS - Page 33

Sub-menu Meaning Description
Spreading disc Setting of the disc type mounted on the
machine
The setting influences the EMC mass
flow control.
Selection list:
• S4
• S6
• S8
• S10
• S12
• S1 (for all machine types
except AXIS-M 50.2)
Bound. sprd.type
Selection list:
• Limited bd
• Full bord.
Bound. disc speed Pre-setting the RPM in the border
spreading mode
To be entered in a separate
input window
Bound. drop point Pre-setting the drop point in the border
spreading mode
To be entered in a separate
input window
Bound.quantity (%) Pre-setting the application rate
reduction in border spreading mode
To be entered in a separate
input window
TELIMAT Saving the TELIMAT settings for border
spreading
Only for AXIS-M machines with
TELIMAT
Fertilisation method
Selection list:
• Normal
• Late sprd.
Selection with arrow keys
Confirmation with the Enter key
Mounting height Indicated in cm front/cm rear
Selection list:
• 0/6
• 40/40
• 50/50
• 60/60
• 70/70
• 70/76
Manufacturer Fertilizer manufacturer input
Composition Percentage of the chemical
composition
Fertilizer class Selection list Selection with arrow keys;
Confirmation with the Enter key
4. Operation
AXIS EMC ISOBUS 5902180-h-gb-
33