Fig. 47: Spreading operation display in the operating screen with GPS Control
The OptiPoint function calculates the optimal turn on and turn off position for spreading in the
headlands based on the settings in the machine control unit; refer to 4.4.10 Calculate OptiPoint.
To ensure correct configuration of the OptiPoint function, enter the correct aerodynamic factor for
the fertilizer being used. The aerodynamic factor can be obtained from the fertilizer chart for your
machine.
See 4.4.10 Calculate OptiPoint.
Turn on distance (m)
The Turn on dist. (m) parameter refers to the switch-on distance [A] measured from the field border
[C]. At this position in the field, the metering sliders open. This distance depends on the type of
fertilizer and represents the ideal switch-on distance for optimized fertilizer distribution.
5. Spreading operation
AXIS EMC ISOBUS 5902180-h-gb-
91
To Next Page
Loading...
