To Next Page

To Previous Page

CHAPTER 4

18 ISOBUS Product Control Installation & Operation Manual

• Rate Bump (+/-)

• Display Smoothing

• Zero Speed Shutoff

• Pressure Display

• Implement Switch (NH3 Applicator only)

• PWM Smart Control

• Dual Loop Control

• Standby Pressure

• High Side Drive

• Rate 1/Rate 2

NOTE: For more information on enabling and using the main screen features, see the Feature Settings

section on page 29.

CONTROL TYPE

Select the “Control Type” drop down menu to change the type of product to be controlled by the ISOBUS node.

Select between the following types of product control types:

• Liquid

• Granular 1 (Single Bed, Single Encoder, with or without Spinner)

• Granular 2 (Dual Bed, Single Encoder, with or without Spinner)

• Granular 3 (Dual Bed, Dual Encoder, with or without Spinner)

NOTE: When the applicator type is set to ‘Sprayer’ or ‘NH3 Applicator,’ the Control Type option is locked on

Liquid.

METER CAL OR SPREADER CONSTANT

The flow meter calibration, or meter cal, value can be found on the tag attached to the flow meter.

NOTE: It is recommended to copy the information from the tag for future reference as tags may fade or be

lost during operation.

Raven ISOBUS Product Control User Manual

Questions and Answers: