Raven ISOBUS Product Control User Manual

Name: Raven ISOBUS Product Control
Brand: Raven
Rating: 4 (1 reviews)

86 pages

To Next Page

To Previous Page

Manual No. 016-0171-362 Rev. F 67

RPM METER CAL

The machine should be configured with a magnetic pickup coil mounted near the bolt heads on the spinner.

Calculate the meter cal by multiplying the number of pulses (bolt heads) per revolution by 10.

FOR EXAMPLE:

If the number of pulses per revolution is 4:

then the value for the Meter Cal would be 40.

RPM TARGET

The Rate Cal should be set to the desired RPM of the spinner.

MeterCal N 10×=

410× 40=

Questions and Answers:

Need help?

Do you have a question about the Raven ISOBUS Product Control and is the answer not in the manual?

General