APPENDIX 8
66 ISOBUS Product Control Installation & Operation Manual
METRIC:
The new spreader constant value should be entered as 817
9. Repeat this procedure until the weight of the metered materials equals the total volume reported by the VT
display.
SPINNER RPM
For spinner box machines, using the optional spinner speed cable (P/N 115-0171-880) to control spinner speed.
VALVE TYPE
Select the valve type of the machine with which the Raven ISOBUS product control node is currently connected to
the spinner.
797 4400×
4290
---------------------------
817=
To Next Page
Loading...
