offered by Busse-Yachtshop.com
Chapter 3: System Tests and Alignment -47
Removing a card
To remove a card with the unit powered down, refer to the illustration, and:
1. Open the chart card door.
2. Grip the card and pull to remove it from its slot.
3. To prevent the ingress of water and consequent damage, close the chart card door
and press firmly until an audible click is heard.
To remove a card with the unit powered, refer to the illustration, and:
1. Press MENU. The System Set Up menu is displayed.
2. Use trackpad up/down to highlight CF CARD REMOVAL.
3. Use trackpad right to select. The following message appears:
D6518-1
System checking card access
Please wait until it is safe to remove card....
To Next Page
Loading...
